Mobile Remote Control¶

To control OwnTone from your mobile device, you can use:

• The web interface
• (iOS) The Remote app from Apple
• (Android) An iTunes/Apple Music remote app
• A MPD client app

The web interface is the most feature complete, but apps may have UX advantages. The table below shows how some features compare.

While OwnTone supports playing tracks from Spotify, there is no support for Spotify Connect, so you can't control from the Spotify app.

The web interface¶

See web interface.

Apple Remote app (iOS)¶

Remote gets a list of output devices from the server; this list includes any and all devices on the network we know of that advertise AirPlay: AirPort Express, Apple TV, … It also includes the local audio output, that is, the sound card on the server (even if there is no sound card).

OwnTone remembers your selection and the individual volume for each output device; selected devices will be automatically re-selected, except if they return online during playback.

Pairing¶

1. Open the web interface at either http://owntone.local:3689 or http://SERVER-IP-ADDRESS:3689
2. Start Remote, go to Settings, Add Library
3. Enter the pair code in the web interface (reload the browser page if it does not automatically pick up the pairing request)

If Remote does not connect to OwnTone after you entered the pairing code something went wrong. Check the log file to see the error message. Here are some common reasons:

• You did not enter the correct pairing code

You will see an error in the log about pairing failure with a HTTP response code that is not 0.

Solution: Try again.

• No response from Remote, possibly a network issue

If you see an error in the log with either:

• a HTTP response code that is 0
• "Empty pairing request callback"

it means that OwnTone could not establish a connection to Remote. This might be a network issue, your router may not be allowing multicast between the Remote device and the host OwnTone is running on.

Solution 1: Sometimes it resolves the issue if you force Remote to quit, restart it and do the pairing process again. Another trick is to establish some other connection (eg SSH) from the iPod/iPhone/iPad to the host.

Solution 2: Check your router settings if you can whitelist multicast addresses under IGMP settings. For Apple Bonjour, setting a multicast address of 224.0.0.251 and a netmask of 255.255.255.255 should work.

• Otherwise try using avahi-browse for troubleshooting:

• in a terminal, run:

  avahi-browse -r -k _touch-remote._tcp
  

• start Remote, goto Settings, Add Library

• after a couple seconds at most, you should get something similar to this:

  + ath0 IPv4 59eff13ea2f98dbbef6c162f9df71b784a3ef9a3      _touch-remote._tcp   local
  = ath0 IPv4 59eff13ea2f98dbbef6c162f9df71b784a3ef9a3      _touch-remote._tcp   local
     hostname = [Foobar.local]
     address = [192.168.1.1]
     port = [49160]
     txt = ["DvTy=iPod touch" "RemN=Remote" "txtvers=1" "RemV=10000" "Pair=FAEA410630AEC05E" "DvNm=Foobar"]
  

  Hit Ctrl+C to terminate avahi-browse.

• To check for network issues you can try to connect to the server address and port with nc or telnet commands.

Remotes for iTunes/Apple Music (Android)¶

The below Android remote apps work with OwnTone.

For usage and troubleshooting details, see the instructions for Apple Remote.

MPD client apps¶

There's a range of MPD clients available from app store that also work with OwnTone e.g. MPD Pilot, MaximumMPD, Rigelian and Stylophone.

The better ones support local playback, speaker control, artwork and automatic discovery of OwnTone's MPD server.

By default OwnTone listens on port 6600 for MPD clients. You can change this in the configuration file.

Due to some differences between OwnTone and MPD not all commands will act the same way they would running MPD:

• crossfade, mixrampdb, mixrampdelay and replaygain will have no effect
• single, repeat: unlike MPD, OwnTone does not support setting single and repeat separately on/off, instead repeat off, repeat all and repeat single are supported. Thus setting single on will result in repeat single, repeat on results in repeat all.